Sep 19, 2009 Trying to connect UN46B7000 LED TV to Buffalo. LED TV to Buffalo Linkstation. Open' the Linkstation, installing optware packages. Ipkg on the Linkstation. Install Install package configure [Buffalo - The Linkstation Wiki.

Some point of the of Buffalo linkstation optware, got broken and no-one seemd to care enought to fix it properly for the repo. The reason was gcc optimization bug. Here is the instructions to fix it from scratch. Prerequisites are Buffalo Linkstation e.g. LS-QVL like mine, install optware and gcc 4.2.3 for it from optware repo. Then follow this.

Download latest package from with e.g. Lynx directly to buffalo or transfer via other methods.

Tar -xvf smartmontools-6.5.tar.gz cd smartmontools-6.5./configure Edit Makefile and replace all -O2 optimization flags with -O0 make Ok, so now you have working smartctl which you can run from your compile directory with e. The Sims 2 Hacked Objects Downloads. g./smartctl –all -d marvell /dev/sda and it will work. Just copy it e.g. Over the non working 5.4 or so.

Hope this helps. Is remarkable little machine. I have purchased several of these devices and can safely recommend them to everyone. You don’t need to necessarily root them and you can use them as they are, but if you want to take most out of these boxes, then you’ll better do it proper way.

This is the complete walk through for that, procedures on setting up Buffalo Linkstation. Basic procedures on setting up Buffalo Linkstation First of course follow the basic procedures, unpack, inspect, then plug it in mains and network as described in the Quick Setup Guide. Press the power button of the machine so that the blue led will start blinking and it will go through the disks (Green lights). Font Navigator 2006 Hacked Celebrity. Then from the disk provided, install NASNavigator2 (I had 2.56 version). It should find your device and show it in the navigator e.g. It will pick up the IP from your DHCP server automatically, for me it gave 192.168.100.65. FW Version it showed 1.65.

Then I first changed my ip for static 192.168.100.3 ip from properties and ip-settings in NASNavigator2. The default password is password. For me the Finnish version of NASNavigator2 shows like this. After that you can invoke the web interface with admin and password. You can go go around the webui and look the settings, but I mainly went straight to System – Maintenance – Firmware Installation page. It shows that you have the latest already, but then open up this page from Buffalo NAS-Central Forums to install Shonks pre modified version of the firmware.

Mahjong Titans Download For Ipad. From there it points you to pick up the proper firmware. You should be getting ls_series-165-mod1a.rar file which is about 230MB. Flashing custom firmware to your LS-QVL Then extract the package to your pc and start LSUpdater.exe. Pick the correct linkstation (if you have many) and click update. Mine was updating from 1.65-3.40 to 1.65-3.41. Then it will inform that Linkstation has been rebooted. Please wait And finally LinkStation has been updated.